Posts Tagged ‘Hdmi Cable’

  • Is the reception good on plasma, HDTV-ready TVs for regular channels that are not HDTV-ready.?
    This may be a myth, but….I had a television salesperson tell me that even if I purchased the best widescreen plasma or LCD/HCD ready television, the reception would be fuzzy for "regular" television shows that are not HDTV, so I would be better off keeping my regular television until more HDTV programming was available. Because of that answer, I've...
    by HDTV at June 2nd, 2009 at 08:06 am
  • What type of HDMI cable do I need for a PS3 connected to a 50" Philips plasma tv?
    I want the best picture quality for both watching tv (Satellite with HD channels) and playing games on my PS3. I saw several types at Best Buy including adapters but was not sure which to buy. Also, do I need male-male or male-female? Is Monster really the best? I do not mind paying more if it is worth it. Any standard, male-male HDMI cable will work fine. Monster is overpriced....
    by HDTV at May 30th, 2009 at 07:05 am
  • Wall Mount TV, HDTV Installation, Plasma LCD TV, Home Theater Recessed Cable Plate Remodeling Kit
    Use our easy to install Recessed Cable Plate Remodeling Kit with Electrical Outlet to install power and hide unwanted audio/video (hdmi, component video, etc) cables in the wall behind your at-home lcd, hdtv, or plasma flat panel TV installation. This kit is ideal when converting an unfinished basement or spare room to a home theater or media room. The Recessed Pro-Power...
    by HDTV at May 28th, 2009 at 10:05 am
  • Wall Mount TV, HDTV Installation, Plasma LCD TV, Home Theater Recessed Cable Plate Installation Kit
    *** AVAILABLE AT THE FOLLOWING RETAILERS *** Do It Yourself...
    by HDTV at May 25th, 2009 at 06:05 pm
  • Wall Mount TV, HDTV Installation, Plasma LCD TV, Home Theater Recessed Pro-Power Kit Installation
    Use our easy-to-install Recessed Pro-Power Installation Kit to install power and hide unwanted audio/video (hdmi, component video, etc) cables in the wall behind your wall mount tv, lcd, hdtv, or plasma flat panel TV. This kit brings a clean, professional image to your at-home lcd, hdtv, or plasma flat panel tv installation. Since this kit does not connect to your homes...
    by HDTV at May 25th, 2009 at 06:05 pm
  • How do i hook up an xbox to a 50 inch plasma hdtv with direct tv?
    What plugs go where and do i have to change channels everytime i play. Consider this, i have no clue. There are a few options to consider. I'm assuming that your TV has more than one HDMI port, as most newer models do. Also, most newer DTV and Xboxes have HDMI ports. The best option is to have your DTV box on one HDMI cable, and your XBox on another. Plug each into...
    by HDTV at May 23rd, 2009 at 10:05 pm
  • I want hook up Plasma TV (Samsung) and PC monitor to my computer at same time. What is best way to do this?
    Plasma TV has two HDMI ports, Computer is three year old Dell PC. And Plasma TV is across room, about 20 ft from my computer. Where can I buy cable that long, what kind of cable do I need….. I want watch both at same time. Get yourself a graphics card that supports dual monitors. Anything modern to 2 years and to now should work. www.tigerdirect.com Make sure you...
    by HDTV at May 22nd, 2009 at 04:05 pm
  • How long does it take until my plasma tv has burn in?
    I bought a plasma tv and, was wondering how long on a pause screen will a panasonic 42inch HD viera plasma TH42PX80A get burn in. Does it have anti burn in features, if so tell me, and also I,am going to be using it to play games on the ps3.(it also double as a Blu-ray player:) And does it have component ports for the ps3 component cables. I also have that TV and yes,...
    by HDTV at May 21st, 2009 at 07:05 am
  • Bought a Full HD Plasma TV but the picture is horrible.?
    My old TV from 2004 has a better picture quality and isn't a plasma or has HD. Do I need special cables for my new plasma tv? for one you are probably looking a stardard definition programing on your high def tv. this always results in the picture looking bad. in order to truly take advantage of you tv you need to get an hd source. whether that be a blu ray disc player...
    by User ImageHDTV at January 7th, 2009 at 08:01 pm
  • I just purchased a 42 inch Samsung plasma TV with the HD ready upconversion DVD player and having issues!?
    I just purchased a 42 inch Samsung plasma TV with the Samsung HD ready upconversion DVD player. I'm currently using the Monster Home HDMI cable and Monster clean power surg protector but I don't seem to be getting the same crisp picture that the floor model had in the store. Any ideas what I'm doing wrong. Should I upgrade my HDMI cable to the M1000 or Flat...
    by User ImageHDTV at January 3rd, 2009 at 10:01 am
  • What is the best home theater system for a Toshiba hdtv?
    My boyfriend recently bought the Toshiba hdtv 42hl167 and I want to get him a compatible home theater system. Any suggestions for something that will work with that tv? Thanks! get him the new denon 3800bd blu- ray player and a denon amp that decodes the new high def sound and a decent hdmi cable he will marry u the day after as for speakers kef are fantastic and look...
    by User ImageHDTV at January 2nd, 2009 at 12:01 pm
  • How to change an hdtv in sd mode to get a hd picture?
    I recently bought a 37" Vizio LCD HDTV. However, when I press info to see the show it says the show then 480i SD. But I have an HD Cable Box and everything. How do I make it so I have an HD picture instead of an SD picture? FIRST, you NEED to check your cable box….make sure in the menu that it's set to OUTPUT a 1080 signal…..if it's set for 480,...
    by User ImageHDTV at January 2nd, 2009 at 12:01 pm
  • how do I install a 50" Pioneer plasma HD-TV?
    do i need any special cables ? have comcast.. should I have Tweeter install it with wal mts. and everything for $750.00 Depends on their equipment, and what kind of capabilities they have set up on their HD boxes. Most of the time they will use a 5 lead patch cable and that will plug into a component bay or even a video bay. More than likely into a component bay. If...
    by User ImageHDTV at January 2nd, 2009 at 12:01 pm
  • my panasonic plasma tv has just been wall mounted, i use and hdmi to cable box?
    but there is no audio…do I need a seperate special cord for hdmi audio? i switched my tv to cable with my remote and i have audio. but only picture without audio when i switch to hdmi 1 with my remote control. is it bad to have both systems hooked up? why cant i get audio at the hdmi spot with my remote. I only get audio when i switch to cable 1. I paid a lot for...
    by User ImageHDTV at January 1st, 2009 at 11:01 am
  • With a wall mount TV, where can I put my DVD player?
    I have a 42 inch plasma TV mounted above my fireplace. I also have an up-converting DVD player that needs to be pluged into the TV with an HDMI cable. Right now the cables are showing and it looks ugly. Any Ideas on a better way to do this? Is there any way to get the DVD player and wires out of sight? It does not have UHF. without wrecking any walls – check out...
    by User ImageHDTV at December 25th, 2008 at 01:12 am
 
close

You need to log in to vote

The blog owner requires users to be logged in to be able to vote for this post.

Alternatively, if you do not have an account yet you can create one here.

Powered by Vote It Up