Posts Tagged ‘Power Supply’

  • I have 42in panasonic plasma tv , that just out of no where shut down. Is it worth fix?
    I bought in 2005, we love the picture, would love to fix but? No warranty left, The diagnostic is power light blinks 10 times, is that some sort of power supply issue?, and suggestions? Again is it worth it? We live in northern NJ Model # TH-42PX50u Yes, the power supply most likely has a fault. The TV is telling you as much, and it’s shutting itself down before...
    by HDTV at February 14th, 2010 at 05:02 am
  • Samsung plasma TV problem?
    My Samsung TV is dotted/snowy when I turn it on. If I unplug it and then turn it on, the picture is clear… although a line remains across the top of snow/dots. Can I repair? You betcha….all you need to know is the TYPE of dots you’re getting. Sounds like logic board dots if you can unplug it and it resets…. Course it could be power supply dots...
    by HDTV at October 12th, 2009 at 05:10 pm
  • Is it bad to turn off home theatre equipment and a plasma television by turning the wall switch off?
    I have a receiver, cable box, and plasma TV plugged into a cheap surge protector and I’ve accidently hit the wall switch off a few times that controls the power outlet they are plugged into. Some devices need to go through a cool down phase after you shut them off using the device’s power switch. If you shut the power off to the device instead, it has no power...
    by HDTV at September 30th, 2009 at 05:09 am
  • My Panasonic Plasma TV Does Not Turn On?
    The Red Light Blinks 7 times What Does This Mean? call a tech or get manufacturer to repair. Its an error code the number of blinks will tell what the problem is. ex 10 blinks power supply. best thing to do is to call pannasonic if its still under warranty. powered by Yahoo Answers addthis_url = 'http%3A%2F%2Fplasmama.com%2Fpanasonic-42-plasma-tv%2Fmy-panasonic-plasma-tv-does-not-turn-on'; ...
    by HDTV at June 7th, 2009 at 11:06 pm
  • How do I stop my Panasonic plasma TV from interfering with the tv set top box remote signal?
    I have a Panasonic VIESA 42" plasma TV. Underneath the TV I have a set top cable box. The plasma TV interferes with the cable box remotes signal. By interferes I mean I usually have to hit a button several times on the remote in order to get it to function once when using the cable box. When I use the cable box remote on the plasma TV it works fine. I have tried...
    by HDTV at June 5th, 2009 at 06:06 am
  • Why does my 42inch Samsung plasma have a blurry red picture?
    For the last month my samsung plasma tv has been giving me issues. At first, half the screen would go black. So I called Samsung to get it repaired. But when I got it back a week later, the same problem reoccured. Except now, half the screen would go white instead of black with a few red pixels in the white… and just today I turned it on and the whole image on the...
    by HDTV at May 28th, 2009 at 10:05 pm
  • I have a 42" plasma television that the audio keeps cutting in and out of. What could the problem be?
    I have tried new cables. The audio keeps coming and going, with the picture coming and going also. Is that the antenna signal that cuts in and out? Reposition the antenna HIGHER and toward the TV towers. Now if you see the problem on a game or DVD player, it's not the antenna, it's the TV set. And if it's cutting in and out, it must be power supply related,...
    by HDTV at May 27th, 2009 at 07:05 pm
  • my 4 month old panasonic plasma tv has sound but no picture, any idea how to troubleshoot it?
    when I turn on the tv the screen is completely black. The sound works but no images not even the volume bars or the channel numbers. the screen went black once before this time but the picture came back on after I played with the remote (not sure if it has any relevance or it was just flukes the image came back) any suggestions or ideas about what is wrong with my plasma...
    by HDTV at May 23rd, 2009 at 10:05 pm
  • I want hook up Plasma TV (Samsung) and PC monitor to my computer at same time. What is best way to do this?
    Plasma TV has two HDMI ports, Computer is three year old Dell PC. And Plasma TV is across room, about 20 ft from my computer. Where can I buy cable that long, what kind of cable do I need….. I want watch both at same time. Get yourself a graphics card that supports dual monitors. Anything modern to 2 years and to now should work. www.tigerdirect.com Make sure you...
    by HDTV at May 22nd, 2009 at 04:05 pm
  • hitachi plasma tv troubleshooting?
    my 42 inch plasma unit from Hitachi(42 PD 7800TA) suddenly stopped working after a year of purchase. I wall mounted it and one day when we were watching it suddenly the screen went blank. Now when I turn it on ,there is nbo picture despite the indicator light is green. Plz can anybody help me These units are board level repair and they have a self-diagnostic function....
    by User ImageHDTV at December 6th, 2008 at 01:12 am
  • i have a Panasonic 42 Inch Plasma TV that keeps shutting off. I unplug it then it comes back on. Picture is ok
    I'm curious to this also. I have a 42" Panasonic Plasma. (it is nearing 5 years old) that has just started exhibiting the same behavior over the past week. Picture is fine also. Honestly, it sounds like a power supply problem, but I haven't had the time to research it in depth. (or have a repairman visit since it's out of warranty and the amount CC...
    by User ImageHDTV at December 3rd, 2008 at 02:12 am
 
close

You need to log in to vote

The blog owner requires users to be logged in to be able to vote for this post.

Alternatively, if you do not have an account yet you can create one here.

Powered by Vote It Up